YC610B Interchangeable Steel Type Kit
YC610B is a complete interchangeable steel type and type-holder set: load the characters you need and stamp a clear, evenly aligned multi-character mark in a single strike. The type swaps and rearranges freely, so one holder handles any changing content — serial numbers, lot numbers, dates and part numbers.
Suitable use: Batch and variable-content marking on metal parts and components.
Core Features
Stamp a whole line in a single blow — spacing and level auto-align with even depth, faster and less error-prone than marking one character at a time.
Swap and rearrange type in seconds — one holder covers ever-changing content. Custom type is available on request.
The type holder is S45C steel for strength and durability; the type is CR-V (6150) tool steel for clear, lasting impressions.
The YC610B holder takes up to 10 pieces of type, struck by hand; an included hex key locks them in place for quick loading and swapping.
Specifications
The type holder is used by hand. A–I are the dimensions of the holder parts.
| Item No. | Character face C | A | B | C | D | E | F | G | H | I |
|---|---|---|---|---|---|---|---|---|---|---|
| YC610B-3 | 3.0mm (1/8") | 18.4 | 80 | 30 | 36 | 56 | 13 | 3.5 | 6.35 | 19 |
| YC610B-5 | 5.0mm (3/16") | 20.5 | 90 | 32 | 57.5 | 74 | 15 | 5.5 | 7.93 | 22 |
| YC610B-6 | 6.0mm (1/4") | 20.5 | 90 | 32 | 57.5 | 74 | 15 | 5.5 | 7.93 | 22 |
＊Unit: mm; I tolerance ±0.01; the holder is used by hand and holds up to 10 pieces of type.
→ For material, hardness, usage and other common questions, see the Steel Stamp FAQ