Home / Products / Tools & Accessories / YES-00 Pneumatic Stamping Hammer

YES-00 Pneumatic Stamping Hammer

No hammer needed — pull the trigger and every character lands at the same depth

The hard part of hand stamping is making every blow the same.
The YES-00 replaces the hammer with compressed air: pull the trigger and the blows come at a steady force, so the hundredth character is as clear as the first.

Runs on shop airThree stamp holder sizes220×55×250mm

Suitable stamps: Young Cycle steel stamps with 6.35, 9.52 or 12.7 mm shanks; change the stamp holder to suit a different shank.

Core Features

Air-powered marking

Replaces the hand hammer. Insert a stamp, press and pull the trigger.

Even marking depth

Steady, repeated blows give every character the same clear depth.

Less effort

No hammer swinging, less fatigue on long marking jobs.

Three shank sizes, one tool

Interchangeable stamp holders for 6.35 / 9.52 / 12.7 mm square-shank stamps.

Fast character change

Pull the stamp out, insert the next one.

Sold separately

Tool body and stamp holders. Order the holder that matches your stamp shank size.

Hand stamping or an air stamping hammer: what is the difference on a long run?

Hand stamping depends on the operator's feel, so a hundred characters means a hundred slightly different blows. Too light and you have to strike again, which is hard to line up and leaves ghosting.
An air blow lands at the same force every time, so a whole row comes out at one depth and the work does not drift as the hand tires. Changing characters is a pull-out and a push-in, with no alignment to set again; the stamps themselves do not change, as long as the shank matches.

Specifications

ItemSpecification
Part numberYES-00 (pneumatic stamping hammer, stamp holder not included)
Tool size220 × 55 × 250 mm

Stamp holders (sold separately)

Part no.Stamp holderBoreStamp shankYoung Cycle stamps (examples)
YE0635W1/4"6.5 mm6.35 mmYC601/602 1–4 mm, YC605/606 1–3 mm, YC607 1–4 mm standard, YC614/615 1.5–3 mm and S-4, YC616 2–4 mm, YC617/618 1.5–4 mm, GL/GN 2–4 mm, YC609B 3/4, YC612-2
YE0952W3/8"10 mm9.52 mmYC601/602/605/606/607/614/615 6 mm standard, GL/GN 7 mm, YC603/604 L-3/L-4/H-5, YC607 L-3/H-5, YC609 3/4, YC613 3, YC612-6
YE1270W1/2"13.4 mm12.7 mmYC601/602/605/606/607/614/615 8 mm standard and 10 mm, YC617/618 10 mm, GL/GN 10 mm, YC603/604 R-3/L-6, YC607L-6, YC609 6/8, YC609B-10, YC613 6
  • The body (YES-00) and the stamp holders are ordered separately. Order the holder that matches your stamp shank size.
  • For continuous pneumatic use we suggest the YC standard series. GL/GN are economy lines and their struck ends are not tempered.
  • Only the three holder sizes above are made. Stamps with 7.93 mm, 11.11 mm, 14.28 mm, 15.85 mm or 19.05 mm shanks have no matching holder; the YC610B interchangeable type kit is a hand-held holder and does not apply either.
  • Choosing the right holder: Match the holder to the stamp's shank size, not the character height. The same character height can have a different shank size in different series (e.g. GL-7 fits YE0952W, but YC601-7 does not) — and even within one series, a YC601-8 fits the 1/2" holder while a YC601S-8 does not. Most 5 mm stamps have a 7.93 or 11.11 mm shank and no matching holder, but YC603H-5, YC604H-5 and YC607H-5 have 9.52 mm shanks and do fit YE0952W. 12 mm and larger are not supported. Not sure? Send us the stamp item number and we will confirm.

YES-00 pneumatic stamping hammer marking a character into a metal part
Fit the stamp into the holder, set it on the workpiece and pull the trigger.

→ For materials, usage and other common questions, see the Steel Stamp FAQ

Also called: pneumatic stamping hammer, air stamping hammer, pneumatic marking hammer, stamping gun.